KANARDIA AETOS 7" (primary display)

Only as primary flight display (PFD) - screen size 7.0 ".
Equipped with integrated AHRS and GPS unit, GPS antenna, OAT probe, cables, accessories.

IT IS NECESSARY TO SET THE VALUES OF YOUR AIRCRAFT

Aetos is a flight and engine value display for ultralight aircraft, autogyros and helicopters. Unlike Nesis devices, Aetos does not support aerial maps. Aetos is a stand-alone state-of-the-art EFIS tool optimized for ultralight aircraft.
We make sure that our devices are light and thin. Aetos weighs only 700 g.

Large 7 "high contrast readable in direct sunlight.

Autopilot
With two servomotors (SERU) you can use Aetos as the main device for autopilot control.

Passive cooling
Low power consumption even at high brightness. This allows passive cooling without fans.

Audio output
Aetos issues many warnings. You can hear them by connecting the Aetos to an audio panel with a standard 3.5mm connector. You can operate Aetos via the CAN bus using a command card (JOYU). S (BOXI).

Carbon monoxide detector (optional)
Built-in carbon monoxide detector that issues a warning before CO rises to dangerous levels.

Integrated backup battery
The integrated battery with a capacity of 4400 mA ensures approx. 45 minutes of uninterrupted operation of the device.


Double set
Double view doubles your options. The secondary Aetos is equivalent and can be used by a co-pilot or as an extension, as a flight information system (EFIS), an engine information system (EMS) or both.

Integrated GPS / AHRS / Pitot system
Aetos has a built-in global positioning system, altitude reference system, pressure measurement system and much more.

ADS-B & Flarm support
By connecting the ADS-B & Flarm module, it will display traffic around you on the navigation screen.

PFD screen
The primary flight view screen consists of a background image and an overlay.

PFD and EMS screen
The main display in combination with the engine monitoring screen shows various engine and fuel related parameters.