DescriptionGlance EFIS 105 (5.7″) is a simple and intuitive MFD. You’ll get only right information at the right time. The clean and simple interface is perfect for any pilot from amateur “Sunday flyers” to professional air racers.
GPS/GLONASS module is included. You can create flight plans, monitor flight zones, airfields, runways, etc. Please note, that the unit has no moving maps. The moving maps are available in Glance EFIS 7″ and 10″.
The basic engine monitoring system for Rotax 912 is included. For bigger engines (such as Lycoming, Continental, Jabiru, MWFly, etc.) you need to use our EMS module. With the module, you’ll have a third screen in the EFIS that visualize all engine parameters.
5.7″ screenGlance EFIS has 5.7″ bright screen. The size is ideal for light aircraft. Usually, it’s quite difficult to install a bigger screen in a front panel.
Direct and Indirect attitude indicatorThe attitude indicator can work in both direct and indirect indication mode. Stringent tests conducted over many years have shown that the indirect indication is much safer than the direct one.
Adaptive indicatorsElements of the interface are displayed on the screen in green color if monitored parameters did not exceed the predefined limits. If the parameter is out of the limit the corresponding indicator turns red. This makes it possible to read indicators more quickly than usual.
Reliable air-navigationGlance EFIS has a very reliable navigation system with worldwide air navigation database. You can update it every 28 days ($200 subscription needed) or annually for free.
No external coolingNo additional active cooling needed.
Rugged constructionThe unit is lightweight yet feels solid and of rugged construction, is compact, and has a very attractive appearance!
Easy installationIt’s very easy to install the EFIS. Just take a look at the installation manual.
Engine monitoringThe EFIS is adapted to Rotax engines. For non-Rotax engines, you have to order an additional external engine monitoring module. It helps you to monitor RPM, oil temperature, oil pressure, all (up to 9) CHT, all (up to 9) EGT. Additionally, you can monitor MAT, OAT, fuel level, fuel flow rate, fuel pressure, voltage, current, etc.
The engine monitoring system can work with one or two engines. In a case of multi-engine installation, you’ll require 2 external engine monitoring modules. The EFIS will detect 2 modules and will display engines’ parameters correctly.